SunRotor 6.2 GPM Submersible Pump Only
Helical Rotor Submersible Pump
Manufacturer Part Number: SR-6
The SR-6 helical rotor submersible water pump offers slightly greater water pumping capacity than our SR-4 model.
All SunRotor pumps require an SRC M-100T 24-48 Volt DC Input Controller to operate properly. Attempting to run these pumps from any other controllers can result in pump failure and voiding of the warranty on the pump.
Features
- Solar, battery or a combination
- Submersible motor protected from ambient water by oil filled jacket (vegetable based oil protects potable water source if vessel is ever compromised)
- Brushless DC motor technology avoids conventional DC brush maintenance and replacement
- All electronics are mounted above ground for longer life and easy access
- Modular concept with separate electronics, motor and pump elements makes system repairable or replaceable in element pieces
- Entire pump body is stainless steel to comply with all local code and pump installation requirements
- CE certified
- ISO 9001
- Highly reliable, single moving part, progressive cavity technology
- Readily repairable in the field
- Designed for submersible operation
- 3/4 inch FNPT output outlet
- 3 inch diameter (76 mm) fits 3.5 inch (89mm) casing
Specifications
|
Nominal |
48 volt operation |
|
Usable voltage range |
24-48 Volts |
|
Power range |
135 Watts to 675 Watts |
|
Maximum functional lift capability |
275 feet (84 m) |
|
Maximum flow at 100 ft (30 m) |
6.8 gallons/minute (25.6 liters/minute) with 675 watts and 48 volts PV nominal voltage |
|
Weight |
12 pounds (5.4 kg)
|
Detailed Description
With four 135 watt / 24 volt solar panels, the SR-6 can deliver 3 gallons/minute (11.5 liters/minute) at 250 feet (76 m) of lift. At 150 feet (45 m) of lift the SR-6 will deliver 6 gallons/minute (23 liters/minute), which will provide sufficient water for over 50 cow/calf pairs. The SR-6 is ideal for applications requiring total lift of 150-250 feet with a flow requirement of 3-6 gallons/minute.
