Schneider Electric Conext XW Pro 6848 RNW865684821 > 6800 W 120/240 VAC 48 VDC Conext XW Pro Hybrid Inverter/Charger
Grid-Tied / Battery Back-Up / Off-Grid Hybrid Inverter / Charger - UL 1741 SA, Rule 21, HECO Rule 14H, and PREPA
The Conext XW Pro 6848 is the ideal solution for solar and storage with grid tied, backup power and off grid capability.
- Rule 21, HECO Rule 14H, and PREPA compliant
- Integrates with Conext™ Gateway and Conext™ Insight 2 for simplified system configuration and powerful remote monitoring & control
- Interoperates with solar charge controllers and PV inverters for both DC coupled and AC coupled configurations
|
All Hybrid Inverter PV Systems will need rapid shutdown. The IMO BG10P34-11 remote shutdown button is an outdoor initiation switch that can be used to trigger PV system rapid shutdown.
IMO RSD Button BG10P34-11 > Rapid Shutdown Button compatible with APsmart Rapid Shutdown System
IEEE 1547-2018 requires the local communications interface to remain available whenever the DER is operating. This indirectly creates a requirement for the IQ Gateway not to reboot during and following a low voltage ride through event. The IQ Gateway hardware was redesigned to meet this requirement so installers must only choose from the list of supported hardware and be running software versions 7.3.460 or later to be fully compliant.
|
Specifications
|
Model
|
Conext XW Pro 6848
|
|
Series
|
Conext XW Pro
|
|
Manufacturer
|
Schneider Electric
|
Part Number
|
865-6848-21 (RNW865684821)
|
Mechanical
|
Type
|
120/240 VAC Hybrid Inverter/Charger
|
|
Operating Temperature Range
|
-25°C to 70°C (-13°F to 158°F)
(power derated above 25°C (77°F)
|
|
Enclosure
|
NEMA Type 1 Indoor
|
|
Dimensions (W x H x D)
|
23" x 16" x 9"
|
|
Weight
|
121.7 lbs
|
|
Shipping Method
|
169 lbs
|
Inverter AC output
Output power (continuous) at 25°C
|
6800 W
|
Overload 30 min / 60 sec at 25°C
|
8500 W / 12000 W
|
Output power (continuous) at 40°C
|
6000 W
|
|
Maximum output current 60 seconds (rms)
|
102 A (120 V); 52 A (240 V)
|
Output frequency (selectable)
|
50 / 60 Hz
|
|
Output voltage
|
L-N: 120 V +/- 3%; L-L: 240 V +/- 3%
|
|
Total harmonic distortion (THD) at rated power
|
< 5%
|
|
Idle consumption search mode
|
< 8 W
|
|
Input DC voltage range
|
42 to 60 V (48 V Nominal)
|
Maximum input DC current
|
180 A
|
Charger DC Output
Maximum output charge current
|
140 A
|
Output voltage range
|
40 - 64 V (48 V Nominal)
|
|
Charge control
|
Three stage, two stage, boost, custom
|
|
Charge temperature compensation
|
Battery temperature sensor included
|
Power factor corrected charging
|
0.98
|
|
Compatible battery types
|
Flooded (default), Gel, AGM, LiON, custom*
|
|
Batter bank range (scaled to PV array size)
|
440 - 10000 Ah
|
AC Input
AC 1 (grid) input current (selectable limit)
|
3 - 60 A (60 A default)
|
AC 2 (generator) input current (selectable limit)
|
3 - 60 A (60 A default)
|
|
Automatic transfer relay rating / typical transfer time
|
60 A / 8 ms
|
|
AC input voltage limits (bypass/charge mode)
|
L-N: 78 - 140 V (120 V nominal)
L-L: 160 - 270 V (240 V nominal)
|
AC input frequency range (bypass/charge mode)
|
55 - 65 Hz (default); 52 - 68 Hz (allowable)
|
AC Grid-Tie Output
Grid sell current range on AC1(selectable limit)
|
0 to 48 A (120 V) / 0 to 27 A (240 V)
|
Grid sell voltage range on AC1
(auto adjusts entering sell mode)
|
L-N:105.5 to 132 +/- 1.5 V
L-L: 211 to 264 +/- 3.0 V
|
Grid sell frequency range on AC1
(auto adjust entering sell mode)
|
59.4 to 60.4 +/- 0.05 Hz
|
Features:
Higher return on investment
-
Rule 21, HECO Rule 14H, and PREPA compliant
Designed for reliability
- Extensive quality and reliability testing
- Highly Accelerated Life Testing (HALT)
- Globally proven and recognized field performance
Flexible
- 120/240 V split phase systems, scalable up to 4 inverters (34 kW)
- Supports DC coupled and AC coupled off-grid and grid-tie architectures
- Supports charging of Lithium Ion battery packs
Easy to service
- Monitor, troubleshoot or upgrade firmware with the ConextTM Gateway and the ConextTM Insight 2
- Global support and training
- Field serviceable with replacement boards and spare parts
Easy to install
- Configures quickly using ConextTM Gateway and the ConextTM Insight 2
- System configures quickly into compact wall-mounted system
- Integrates both grid and generator power with dual AC inputs
- Available in pre-wired system with low voltage and high voltage MPPT battery charging systems
