Samlex 30 Amp Automatic Transfer Switch
Whether you’re using solar, batteries, or a generator to power your AC devices on the road, chances are you want to use shore power when it’s available. Connect a Samlex Transfer Switch to your generator or to your inverter/battery bank and have your AC source switched automatically to shore power when you plug in.
Specifications:
| Model |
STS-30 |
| Series |
|
| Manufacturer |
Samlex America |
| Additional Info |
Data Sheet |
Mechanical
| Operating Temperature |
0° C - 40° C |
| Dimensions |
8.4" x 9.0" x 3.2" |
| Weight |
4.4 lbs |
| Shipping Method |
Ground |
Electrical
| Input/Output Voltage |
120 VAC VAC |
| Input/Output Frequency |
60 Hz |
| Input/Output Current |
30 A |
Detailed Description
- Automatically switches between 2 separate AC input sources: Utility Power and a Generator; or Utility Power and Inverter; or Generato and Inverter
- Has rated capacity of 30 Amps at 120 VAC and is suitable for 30 Amp Utility Power Cord and Generator of up to 3.6 KVA capacity
- Uses heavy duty Double Pole Double Throw (DPDT) relay for switching both the Line and Neutral
- Can be installed on the line side of the main breaker panel allowing switching of the entire load or on the load side to only switch dedicated circuits
- DIP Switch select to enable time delay of 20 to 25 sec when transferring to a generator
- Comes with a standard North American power cord for convenient connection to 15 Amp NEMA5-15R receptacles on a generator or an inverter with up to 1800 VA capacity (Replace this cord with 30 Amp cord if full 30 Amp capacity is required)
- NEMA5-20R Duplex Receptacle for convenient connection of battery charger
