SmartRE is the revolutionary Smart Renewable Energy solution from OutBack Power, bringing you simplified grid-tie solar with back-up power for residential and small commercial applications. Designed with an emphasis on ease of installation, a SmartRE solution installs and operates similarly to basic grid-tie solar inverters but with the unique additional benefit of providing UPS quality battery back-up during utility outages.
An integrated ultra-fast AC transfer switch guarantees that even sensitive back-up loads, like computers, never know when a utility outage occurs. Recommended AGM batteries are maintained and charged by an innovative OutBack multi-stage charging process. This valuable feature assists in providing reliable back-up power and will help extend your battery life up to 10 years.
| Models |
SMARTRE 3000 |
| Continuous Power Rating |
3000VA |
| Part Numbers |
SRE3000-120-NA |
SRE3000-120/240-NA |
| Inverter Model |
GVFX3648 |
GVFX3648 |
| Charge Controller Model |
FLEXmax 80 |
FLEXmax 80 |
| AC Specifications |
Nominal AC Voltage
|
Sell: 120VAC
Invert: 120VAC |
Sell: 120VAC
Invert: 120VAC / 240VAC |
| Nominal Frequency Output |
60 Hz |
60 Hz |
| Maximum AC Current Output Peak (1 ms) |
70A at 120VAC |
70A at 120VAC
35A at 240VAC |
| RMS (100 ms) |
50A at 120VAC |
50A at 120VAC
25A at 240VAC |
AC Overload Capability Output
Surge / 5 Sec /30 Min |
6000VA / 5000VA / 4000VA |
| AC Output Current |
25.0A at 120VAC |
25.0 A at 120 VAC
12.5 A at 240 VAC |
| Total Harmonic Distortion Sell Current |
<5% |
| Invert Voltage |
2% Typical |
| AC Inputs |
Two 60A 120VAC AC Inputs ( Grid / Generator ) |
| AC Transfer Switch Speed |
< 16 milliseconds |
| Anti-Islanding Protection |
UL1741-2005 / IEEE1547 Compliant |
| Output Waveform |
True Sine Wave |
| DC Specifications |
| Maximum PV Array Wattage - STC/Nameplate |
4000 W DC STC |
| MPPT PV Input Voltage Range |
50-150 VDC VOC Including Maximum Voltage Temperature Correction |
| MPPT PV Operating Voltage Range |
50-145 VDC Including Maximum Voltage Temperature Correction |
| Maximum PV Open Circuit Voltage |
150 VDC VOC |
| Maximum PV Short Circuit Current |
64 A |
| Ground Fault Protection |
80 A DC Breaker (Detection >0.5A) |
| Electronic Overcurrent Protection |
Yes |
| Separate PV MPPT Inputs |
1 |
Maximum Battery Charger Output
|
AC Source: 45A DC
DC Source: 80A DC |
AC Source: 45A DC
DC Source: 80A DC |
| Battery Voltage Nominal |
48 VDC |
| Operating Range |
42-68 VDC |
| Recommended Minimum Battery Capacity |
100 amp hours at 48VDC / ~ 4kWH |
| Temperature Compensated Battery Charging |
Yes |
| Solution Specifications |
| Inverter Efficiency |
Up to 93% |
| Nighttime Consumption |
0 W AC |
| AC Input and Output Terminals |
Accepts #2 to #14 AWG SET/Screw Type Compression Terminals |
| Information Display |
Battery State of Charge, PV Active, Inverter Output, Grid Active, Generator Active |
| Integrated Communications |
Included MATE 2 for Remote System Information |
| Operating Temperature Range |
-40° C to 60° C (power derated above 25° C) |
| Batteries |
Not Included |
| Recommended Batteries |
Group 27, Group 31 and Tall Group 31 AGM or Gel Cell Batteries |
| Enclosure Rating |
Type 3R / Outdoor Rainproof |
| Enclosure Materials |
Aluminum |
| Electronics Enclosure Mounting Options |
Wall Mount (Bracket Included), Ground Mount, Concrete Pad Mount |
| Certifications |
ETL Listed to UL1741, CSA C22.2 No. 107.1 |
| Warranty |
5 Year Limited Warranty Standard/Optional 10 Year Warranty |
| Options |
Matching Battery Enclosure, Battery Enclosure Paralleling Kit, Battery Installation Kit |
