Outback Power 178 Amp Hour 12 Volt VLRA-AGM Battery
Manufacturer Part Number: EnergyCell 200NC
With limited sun hours for proper recharging of standard deep cycle batteries, the need for a PSoC technology is greatly needed. This advanced technology will allow for extended life of a battery in self-consumption applications. Nano-Carbon offers all the safety and convenience of a VRLA battery with the cycling benefits of advanced energy storage. Operation of Nano-Carbon in an application where full battery recharges aren’t always possible, like off-grid or areas of the world with limited sun hours, can maximize your overall cycle life by up to 44% versus a traditional VRLA deep cycle battery. The Nano-Carbon is an enhanced and optimized negative active material formulation which makes it more than just a carbon additive. The high surface area carbon is a specially formulated additive for improving the negative active material in lead-acid batteries. Carbon increases conductivity and adds additional capacitance to the battery. Nano-Carbon improves charge efficiency and allows PSoC operation with improved deep discharge recovery.
Features
- Safe, maintenance-free convenience
- Maximize overall cycle life by up to 44% versus traditional VRLA deep cycle batteries
- 95% round trip efficiency
- 2 year full replacement warranty in PSoC applications
- Optimized for use with OutBack’s IBR, OBE, OBE-FT and IBE enclosure and racking solutions
- For energy arbitrage/self-consumption applications
Specifications
|
|
EnergyCell 200NC
|
|
Cells Per Unit:
|
6
|
|
Voltage Per Unit:
|
12 VDC
|
|
Operating Temperature Range:
|
Discharge: -40 to 71°C (-40 to 160°F)
Charge: -23 to 60°C (-10 to 140°F)
|
|
Optimal Operating Temperature Range:
|
23 to 27°C (74 to 80°F)
|
Recommended Maximum Charging
Current Limit per String:
|
53ADC
|
|
Float Voltage Charge:
|
13.62 VDC unit Average at 25°C (77°F)
|
Equalization and Cycle
Service Charging Limits:
|
14.4 VDC unit Average at 25°C (77°F)
|
|
Self Discharge:
|
Battery can be stored up to 6 months at 25°C (77°F) before a freshening
charge is required. Batteries stored at temperatures greater than 25°C (77°F) will require recharge sooner than
batteries stored at lower temperatures.
|
Temperature Compensation Factor
(Charging):
|
5mV per degree C per cell (2V)
|
|
Terminal:
|
Threaded copper alloy insert terminal to accept ¼-20 UNC bolt
|
|
Terminal Hardware Initial Torque:
|
110 in-lbs (12.4 Nm)
|
|
Weight (lbs/kg):
|
131 lbs (60 kg)
|
|
Dimensions:
|
12.60" x 22.01" x 4.95" (32 x 55.09 x 12.6 cm)
|
Documentation
