Morningstar > TriStar 60 Amp 600 Volt DC MPPT Charge Controller / Disconnect Box / DC Transfer Switch
Morningstar TS-MPPT-60-600V-48-DB-TR includes a pre-wired DC disconnect box and DC Transfer Switch (600V; 30A double pole; double throw DC Transfer Switch)
Morningstar’s TriStar MPPT 600V Charge Controller (TS-MPPT-60-600V-48-DB-TR) can be used with higher voltage photovoltaic (PV) arrays, and select wind turbines or hydropower systems.* This product enables the following application scenarios:
- Adding modules incrementally with no string sizing issues
- Off-grid PV systems with input voltages greater than 150V
- Wind/hydro battery charging systems*
- Fewer combined circuits and lower current for long wire runs from the array to the controller
- New installation grid-tie PV systems with battery back-up
- Retrofitting grid-tie PV systems to include battery back-up without changing the PV array configuration
- Supplementary charging for AC Coupled PV systems
Specifications
|
Model
|
TS MPPT 60 600V 48V DB TR
|
|
Series
|
Tristar
|
|
Manufacturer
|
Morningstar
|
Mechanical
|
Type
|
MPPT
|
|
Dimensions
|
21.4" x 8.7" x 5.9"
|
|
Weight
|
28.1 lbs
|
Input (DC)
|
Rated Current
|
60 A
|
|
Maximum Open Circuit Voltage
|
600 VDC
|
|
Battery Voltage
|
48 VDC
|
Product Features
High Voltage Capacity
- Maximum input voltage of 600V
- Operates with PV array Voc voltages up to 525 Voc
- Wind, hydro operating voltages up to 500 Vdc*
- Pre-set for 48 Vdc battery systems
- Programmable for 24V, 36V and 60V battery systems
- Allows long wire runs from the array to the controller
- Higher voltage reduces voltage drop and wire costs
- No combiner boxes required for single or two string systems
- Better enables grid-tie PV systems with battery back-up
- Enables easier PV array expansion than lower voltage systems and accommodates increasing loads
Extremely High Reliability
- Robust thermal design and no cooling fans
- No moving parts
- Superior lightning protection from nearby lightning-induced voltage/current spikes
- Extensive electronic protections
- Epoxy encapsulated inductors and conformally coated
printed circuit boards
Very High Efficiency
- 97.9 % peak efficiency
- Proprietary tracking algorithm minimizes power losses
- Low self-consumption
- Continuous operation at full power to 45°C ambient temperatures without need to de-rate
- Electronic devices with higher ratings to minimize losses from heating
Maximizes Energy Harvest
Morningstar TrakStarTM MPPT Technology features:
- Better peak power point tracking than other MPPTcharge controllers
- Very fast sweeping of the entire PV array
- Recognition of multiple power points during shading or mixed PV arrays
- Low input voltage operation
- Excellent performance at sunrise and low solar insolation levels
Communications Capabilities
- Enables system monitoring, data logging and adjustability. Uses open standard MODBUS™ protocol and Morningstar’s MS View software
- Meterbus: Communications between compatible Morningstar products
- Serial RS-232 and EIA-485 serial connectivity
- Ethernet: fully web-enabled interface to a local network or internet; view from a web browser or send email
Other Features
- High-Low voltage barrier improves safety
- Available with optional Disconnect Box: 600V PV disconnect switch, battery breaker and prewired input/output bus bars
- Available with DC Transfer Switch option for switching from a GT string inverter to battery backup charging during a utility outage. Multiple controllers and GFPDs may be added later, on an as-needed basis
* To avoid product/system failure, please contact Morningstar for latest wind/hydro information.
Also known as:
Tri-Star TS-MPPT-60-600V-48-DB-TR
Tri-Star TS.MPPT.60.600V.48.DB
Tri Star TS MPPT 60 600V 48 DB TR
Tri Star TS MPPT 60 600V 48 Disconnect Box Transfer Switch
