Enphase IQ 7 > 250 Watt MC4 Micro Inverter - IQ System
The IQ7 micro inverters from Enphase are designed to handle 235 to 350 watt solar panels. The IQ7 is compatible with 60-cell solar panels.
240 Split Phase ONLY
|
Model
|
IQ7-60-2-US
|
|
Series
|
IQ7
|
|
Manufacturer
|
Enphase Energy
|
Mechanical
|
Type
|
Grid Tie - Micro Inverter
|
|
Ambient Temperature Range
|
-40°C to +65°C
|
|
Approved for wet locations
|
Yes
|
|
Enclosure
|
Class II double-insulated, corrosion resistant polymeric enclosure
|
|
Environmental category / UV exposure rating
|
NEMA Type 6 / outdoor
|
|
Cooling
|
Natural Convection - No fans
|
|
Connectors
|
MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
|
|
Dimensions (W x H x D)
|
8.35" x 6.89" x 1.19" (without bracket)
|
|
Weight
|
2.38 lbs
|
|
Shipping Method
|
Ground
|
Input (DC)
Commonly used module pairings:
Recommended PV Power (STC)
|
235 W - 350 W
|
|
Module compatibility
|
60-cell PV modules only
|
|
Max Voltage
|
48 V
|
|
Peak Power Tracking Voltage
|
27 V - 37 V
|
|
Operating Range
|
16 V - 48 V
|
|
Min/Max Start Voltage
|
22 V / 48 V
|
|
Max DC short circuit current (module Isc)
|
15 A
|
|
Overvoltage class DC port
|
II
|
|
DC port backfeed under single fault
|
0 A
|
|
PV array configuration
|
1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit
|
Output (AC)
|
Peak Output Power
|
250 VA
|
|
Maximum continuous output power
|
240 VA
|
|
Nominal (L-L) voltage/range²
|
240 V / 211-264 V
208 V / 183-229 V
|
|
Maximum continuous output current
|
1 A @ 240 V
1.15 A @ 208 V
|
|
Nominal frequency
|
60 Hz
|
|
Extended frequency range
|
47 - 68 Hz
|
|
AC short circuit fault current over 3 cycles
|
5.8 Arms
|
|
Power factor at rated power
|
1.0
|
|
Maximum units per 20 A branch circuit
|
16 (240 VAC)
13 (single-phase 208 VAC)
|
|
Overvoltage class AC port
|
III
|
|
AC port backfeed under single fault
|
0 A
|
|
Power factor setting
|
1.0
|
|
Power factor (adjustable)
|
0.7 leading ... 0.7 lagging
|
Features
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Built-in rapid shutdown compliant (NEC 2014 & 2017)
Productive and Reliable
- Optimized for high powered 60-cell modules
- More than a million hours of testing
- Class II double-insulated enclosure
- UL listed
Smart Grid Ready
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
- Meets CA Rule 21 (UL 1741-SA)
Detailed Desription
Enphase's seventh-generation microinverters are powered by our unique software-defined architecture, offering an efficient design with a single hardware SKU worldwide. The IQ 7 Micro series (IQ7-60-2-US and IQ7PLUS-72-2-US) produces 4% more power, and is 19% lighter and 17% smaller than the IQ 6 series.
The IQ 7 continues to offer the same ease of installation with revolutionary 2-wire cabling. It also leverages semiconductor integration for higher reliability and better economies of scale. With the IQ 7 series, Enphase also introduces the Enphase IQ 7X, a 320-watt, high-power microinverter built for 96-cell modules.
The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro
dramatically simplify the installation process while achieving the highest system efficiency.
Part of the Enphase IQ System, the IQ 7 and IQ 7+ Microinverters integrate seamlessly with the Enphase IQ Envoy, Enphase Q Aggregator,
Enphase IQ Battery™, and the Enphase Enlighten monitoring and analysis software.
IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.
Also known as:
IQ 7
IQ7-60-2-US
IQ7 60
IQ Seven
