EcoDirect > DIY Small Off Grid System Kit - 2.4 kWhs of usable power - DIY Solar
To take advantage of this offer, contact our sales department at 888-899-3509 ext 1. Freight shipping included. (Continental US, only)
This DIY 2.4 kWhs off-grid solar kit contains everything but the installer! This small do it yourself off-grid system is perfect for powering a small cabin, mobile or marine application or as an emergency back-up system. You could run most refrigerators for a day, charge your cell phone, lap top, watch t.v. for a few hours or even just run your lights. The possibilities are endless! Use in the event of a power outage, or on the go at a campground. Your solar panels will charge your batteries during the day and the 120V inverter will allow you to power most appliances. Just be sure not to plug anything in that would exceed 2000 watts.
To take advantage of this offer, order online or contact our sales department at 888-899-3509 ext. 1.
PV Array
640 Watts - Canadian Solar CS1H-320MS-Black > 320 Watt HiDM High Density Mono-PERC Solar Panel - 35mm - BoB - quantity two
Inverter
2000 watt pure sine wave inverter - Cotek SP2000-124
Battery Bank
24 Volt - Fullriver DC224-6 - quantity 4
Battery Bank Size
5.4kWh Battery Bank
(2.4kWhs of usable power at 50% depth of discharge)
Charge Controller
25 Amp 12/24 Volt MPPT Charge Controller with Digital Meter - Morningstar ProStar PS-MPPT-25M
Mounting Solution
Included - Racking to support (2) solar panels - IronRidge
Included Accessories
Battery / Inverter Cables
Circuit Breakers and Enclosure
EcoDirect Off-Grid-System-2.4kWhs - Items included with this DIY kit:
Canadian Solar CS1H-320MS-Black > 320 Watt HiDM High Density Mono-PERC Solar Panel - 35mm - BoB - Qnty. 2
EcoCable 10 AWG Solar PV Cable by the Foot - Black - Qnty. 60 Feet
The electrical specifications of the products included in this kit are listed below.
Solar Panels - Quantity 2:
Canadian Solar > 320 Watt HiDM High Density Mono-PERC Solar Panel - 35mm BoB
Monocrystalline Solar Panel. 35mm Black Frame, Black Backsheet.
Model
CS1H-320MS-Black
Series
CS1H-MS
Manufacturer
Canadian Solar
Mechanical
Type
Monocrystalline
Dimensions
66.9" x 39.1" x 1.38"
Weight
42.3 lbs
Frame
Black Anodized aluminum
Connector
Junction Box - IP68, 3 diodes
(w MC4 compatible leads)
Electrical
Watts (STC)
320 W
Max Power Voltage (VMPP)
35.8 V
Max Power Current (IMPP)
9.01 A
Open Circuit Voltage (VOC)
43.3 V
Short Circuit Current (ISC)
9.51 A
Max System Voltage (UL)
DC 1000 V
Warranty
10 Years Materials and Workmanship
25 Years linear power output
Product Description
With Canadian Solar’s innovative module technology and
HiDM High Density Mono-PERC cell technology, we will offer our customers
high power modules up to 330 W with enhanced aesthetics
appearance. Through maximizing the light absorption area
and removing the loss of ribbon resistance, the module
efficiency can reach up to 19.86 %.
Features
Maximize the light absorption area,
module efficiency up to 19.86 %
Low temperature coefficient (Pmax)
Better shading tolerance
Lower internal current, lower hot spot temperature
Cell crack risk limited in small region, enhance the module reliability
Heavy snow load up to 5400 Pa, wind load up to 2400 Pa
Charge Controller:
MorningStar ProStar MPPT 25 Amp 12/24 Volt MPPT Charge Controller - with Digital Meter
Options: Digital Meter
Manufacturer Part Number: PS-MPPT-25M
Detailed battery programming options allow for advanced battery support for the latest Lithium, Nickel Cadmium, and Lead Acid battery types.
Morningstar has added MPPT to their ProStar line of controllers! This 25M MPPT Charge Controller (PS-MPPT-25M) comes with a Meter Display, and is capable of charging all battery types, including Lithium Ion.This is the first mid-range MPPT controller fully UL and IEC listed, that has integrated lighting and load control. The NEW ProStar MPPT™ is a mid-range MPPT solar charge controller with TrakStar Technology™ that provides maximum power point tracking (MPPT) battery charging for off-grid photovoltaic (PV) systems up to 1100 watts. This device is ideal for industrial and residential applications. An optional Wire Box for the ProStar MPPT controller provides a wiring compartment with knockouts for conduit and cable glands. It provides for a cleaner, safer install.
This version of the controller has the NEW Meter design. It offers:
Graphic LCD display with large font
Bright LED backlit display
Various display status screens
Easy, intuitive backlit navigation arrow buttons
Field adjustable and configurable settings for charging, load control, and lighting control
Features
Load & Lighting Control
Low Voltage Disconnect, Low Voltage Reconnect Settings:
11.4V/12.6V or custom (x2 for 24 volt systems)
Lighting Settings: Dusk-dawn or custom
Mechanical
Dimensions
Standard: 20 x 17 x 7 cm / 7.9 x 6.7 x 2.8 in
w/ Wire Box: 20 x 28.5 x 9.2 cm / 7.9 x 11.2 x 3.6 in
Weight
Standard: 1.4 kg / 3.1 lbs
w/ Wire Box: 1.8 kg / 4.0 lbs
Wire Size Range
Power terminals: 2.5 - 35 mm2
/ 14 - 2 AWG**
